BACKGROUND
One way A/C is required to bring outside air into the room in order to keep room with positive pressure. The positive pressure can protect room from outside dust and outside humid air. For this project, the dryer machine has exhaust air out for 7,000 cfm. The AHU was designed at 7,500 cfm in order to keep room positive and control its humidity as maximum not over than 50%RH at 21˚C.
AHU has been designed with using aluminum plate heat exchanger for pre-cooling and re-heating according to its requirement.
SOLUTION
NANTIER team has surveyed installation area where AHU (Dehumidifying Air Handler) would be located. After survey, our team has adjusting location of air inlet/outlet, piping, and access doors for perfectly fit installation at limited area.
AHU has been delivered and unassembled then carry up piece by piece to be reassembled again at the installation area. Ducting and piping were installed according to our as-built 3D drawing.
RESULTS
AHU has dehumidified and supplied air volume of 7,500 CFM cooled dry air automatically to the Starch kitchen room in order to keep room cool and dry.
LATEST NEWS
- Kitchen Extraction SystemDecember 18, 2023 - 11:59 am
- QF Duct ExtendAugust 3, 2021 - 10:59 am
- FabricAir Supply Air Duct for GreenHousesApril 1, 2021 - 10:59 am
- FabricAir Supply Air Duct for Commercial Carrier LAU-X SeriesFebruary 10, 2020 - 10:59 am
- NANTIER FAU 10,000 CFM (Dehumidifier)October 9, 2019 - 10:59 am
Pages
Contact
phone: +66 (0)2 444 9817
fax: +66 (0)2 444 9818
Mo – Fr : 8:00 – 17:00
Sa – Su : closed
sales@nantier.com
info@nantier.com